Making the PCB:

Using Typhon:

Typhon.png
Typhon.png

Using CNC milling machine:

You can use the 2 Gcode (generated with pcb2Gcode Eagle's plugin) to use with your CNC machine.
The milling bit i use is either a 0.8mm (0.0315 inch) about drill or a 20° routing bit.
  • NOTE: I have better results with a 20° routing bit.

here are the Gcode files:
The start position is on the bottom right corner of the PCB.
The board dimension is :
  • 91.3 mm Width (about 3.594488 inch)
  • 85.3mm Height (about 3.358268 inch)

Last edited Jul 27, 2013 at 2:46 PM by Nutz95, version 4

Comments

No comments yet.